Automotive Industry
One of our main areas of application is fans for the automotive industry. We equip complete paint shops with our fans. Whether in the spray booth, in the dryer or in the cataphoretic painting system, our fans are the right solution for any intake and exhaust system.
Centrifugal fans are mainly used as free-wheeling or housing fans when the absolute absence of silicon is required.
The housing fans impress with their special, gas-tight shaft seal. In the standard version, the free-wheeling fans are mounted on a base frame. For duct or wall installation, they can also be produced in an ATEX version.
The following extras are available for EVG fans for the automobile industry
- Pull-Out
- Stainless steel version
- Mechanical, air-operated brakes
- If sound measures are required, we provide insulation, sound insulating enclosures complete with silencers
- Low-sparking design according to VDMA 24169 Zone 1 or Zone 2.
- Special non-stick coating, such as Ruby Red or Halar
Reference
BMW Dingolfing
To ensure that the personally preferred colour remains brilliant for the entire life of the car, the paint job consists of many work stages and multiple layers. The spray cabin is therefore the core element of the paint shop. To remove the resulting paint mist from the air, EVG supplies the perfect exhaust air fans in an ATEX version. We use built-in fans with a freewheel for the incoming air. To clean the exhaust air after cathodic electrocoating (TAR), gas-tight housing fans are used. In this way, EVG fulfils the highest requirements of BMW for this particularly environmentally-friendly integrated painting process.
Changan Ford Automotive | Dürr Systems
In painting plants, the drying process is used to harden the coats of paint. To create the perfect surface, the fans are designed exactly for the operating point. The absolute absence of silicon is a basic prerequisite. Our housing fans are used for the dryer exhaust air and our free-wheeling built-in fans are used for the incoming air.
Dürr AG
Painting plants with the highest level of quality are the premisses of our customers. To provide support for a perfect painting result, EVG supplies customised incoming air, circulated air and exhaust air fans with an optimum operating point. Our wide range of products means that we always have a suitable fan available even for unusual requirements. ATEX, stainless steel or special coating versions are also available for this.
Output range up to
- Volume flow: 300,000 m³/h
- Pressure: 10,000 Pa
- Temperature: 350 °C
- Output: 500 kW
- Miscellaneous: Silicone-free, non-stick coatings
Fans
Areas of use
- Automotive paint shops
- Spray booths, dryer
- Surface coatings
- Foundry extraction
- Filter systems/Process air